Arduino Nano RP2040 Connect with Header ABX00053

(0) 0 Reviews 0 Orders 0 Wish listed

₹60.00

Quantity :

Total price :

(Tax : )

Overview
Reviews

While the news-breaking launch of the Raspberry Pi Pico is still fresh in our minds, here is another launch of a tiny but powerful development board in the world of microcontroller boards on the footprint of Raspberry Pi Pico from Arduino officials.

Arduino named it “Arduino Nano RP2040 Connect” a newly launched Microcontroller board welcoming the Raspberry Pi’s RP2040chip on which NANO connect has been built. The Arduino Nano RP2040 Connect shares a similar form factor to the Raspberry Pi Pico, but it includes extra functionality, chiefly WiFi and Bluetooth along with a 9-axis IMU sensor and microphone.

Arduino also broke the news that they will be porting the Arduino IDE for use with the RP2040 chip. This is welcome news for C/C++ developers and embedded hobbyists alike.

Features:

Raspberry Pi RP2040 Microcontroller:

133MHz 32bit Dual Core Arm Cortex-M0+
264kB on-chip SRAM
Direct Memory Access (DMA) controller
Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
USB 1.1 controller and PHY, with host and device support
8 PIO state machines
Programmable IO (PIO) for extended peripheral support
4 channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion
SWD Debugging
2 on-chip PLLs to generate USB and core clock
40nm process node
Multiple low power mode support
USB 1.1 Host/Device
Internal Voltage Regulator to supply the core voltage
Advanced High-performance Bus (AHB)/Advanced Peripheral Bus (APB)

U-blox® Nina W102 WiFi/Bluetooth Module:

240MHz 32bit Dual Core Xtensa LX6
520kB on-chip SRAM
448 Kbyte ROM for booting and core functions
16 Mbit FLASH for code storage including hardware encryption to protect programs
and data
1 kbit EFUSE (non-erasable memory) for MAC addresses, module configuration,
Flash-Encryption, and Chip-ID
IEEE 802.11b/g/n single-band 2.4 GHz WiFi operation
Bluetooth 4.2
Integrated Planar Inverted-F Antenna (PIFA)
4x 12-bit ADC
3x I2C, SDIO, CAN, QSPI

Memory:

AT25SF128A 16MB NOR Flash
QSPI data transfer rate up to 532Mbps
100K program/erase cycles

For the detailed description of the product Please go through the datasheet in the attachments.

Specifications:

Item Type:	Dev. Board, With Header
Model Type	Nano
Model No.:	ABX00053
Processor	240MHz 32bit Dual Core Xtensa LX6
SRAM	520kB on-chip
ROM	448 KB
Flash Memory:	16 Mbit
Connectivity	Bluetooth 4.2, IEEE 802.11b/g/n
Interfaces	3x I2C, SDIO, CAN, QSPI
Shipping Weight	0.03 kg
Shipping Dimensions	8 × 5 × 2 cm