Original Arduino MKR Wifi 1010 Board ABX00023

(0) 0 Reviews 0 Orders 0 Wish listed

₹60.00

Quantity :

Total price :

(Tax : )

Overview
Reviews

The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.

The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It’s equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi-based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption.

Pinout diagram:

This thin board has been designed to offer a practical and cost-effective solution for makers to design IoT projects with minimal previous experience in networking. It is based on the low power Arm® Cortex®-M0 32-bit SAMD21, which is part of the Arduino MKR family. Wireless devices specifically designed for the Internet of Things (IoT).

Specifications:

Item Type:	MKR Series Board
Model Type	MKR WiFi
Model No.:	ABX00023
Microcontroller	SAMD21
Microcontroller Chip	SAMD21 Cortex®-M0+ 32bit low power ARM MCU (datasheet)
Radio module	u-blox NINA-W102 (datasheet)
Board Power Supply	5V (USB/VIN)
Secure Element	ATECC508 (datasheet)
Supported Battery	Li-Po Single Cell, 3.7V, 1024mAh Minimum
Operating Voltage (VDC):	3.3V
Digital I/O Pins	8
PWM Pins	13 (0 .. 8, 10, 12, 18 / A3, 19 / A4)
Interface	1 x UART 1 x SPI 1 x I2C
Analog Input Pins	7 (ADC 8/10/12 bit)
Analog Output Pins	1 (DAC 10 bit)
External Interrupts	8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2)
DC Current per I/O Pin (mA)	7 mA
Memory	CPU Flash Memory 256 KB (internal) SRAM 32 KB EEPROM no
Clock Speed	32.768 kHz (RTC), 48 MHz
Additional Specs.	6, LED_BUILTIN
Length (mm):	61.5 mm
Width (mm):	25 mm
Weight (g):	32
Shipping Weight	0.05 kg
Shipping Dimensions	8 × 4 × 2 cm