Unsoldered Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C with WhiteType-C Cable 30c

(0) 0 Reviews 0 Orders 0 Wish listed

₹60.00

Quantity :

Total price :

(Tax : )

Overview
Reviews

This Arduino-compatible Nano V3.0 micro-controller is a small, complete, micro-controller board based on the ATmega328 MCU. It has more or less the same functionality as the Arduino Duemilanove, but in a smaller package. It lacks only a DC power jack, and uses the more compact Mini USB (Mini-B) connector instead of a standard USB connector.

It is compatible with Arduino programs and the Arduino IDE. This version of the Nano uses the CH340G USB interface controller.

It can be powered via the Mini-B USB connection, a 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

Note: If you are getting the error while uploading the code in the Arduino Nano or not detecting the port need to upload the bootloader.

Features:

CH340G USB bus converter chip replaces FT232RL
Operating Voltage（logic level): 5V
8 analog inputs ports: A0 – A7
14 Digital input / output ports: TX, RX, D2 – D13
6 PWM ports: D3, D5, D6, D9, D10, D11
1 pair of TTL level serial transceiver ports: RX / TX
Uses Atmel Atmega328P-AU MCU with bootloader installed
Support USB download and Power over Mini-B Mini USB connector
Recommended input voltage: 7V – 12V DC on pin 30 or 5V on pin 27
Maximum input voltage limits: 6V – 20V
Supports ISP download
Supplied with connector pins (headers), not soldered to the board for user flexibility

Specifications:

Item Type:	Dev. Board, Unsoldered
Board Type:	Nano
With Cable (Y/N):	Y
Chip Type:	ATmega328P
Memory:	32 KB of Which 2 KB Used By Bootloader
Operating Voltage (VDC):	5V
Max Supply Voltage (V)	6V – 20V
Processor	ATmega328
USB Connector	2.0 Ports Mini USB
Digital I/O Pins	Digital I/O Pin 22
Cable Type	TYPE C
Shipping Weight	0.021 kg
Shipping Dimensions	10 × 9 × 1 cm